Vehicle Moves In D, 2, And 1, But Not In R

Vehicle moves in D, 2, and 1, but not in R

Shift solenoid valve E defective

Shift fork shaft stuck

Shift valve E defective

4th/reverse accumulator defective

4th clutch defective

Reverse gears worn or damaged

Notes

Test shift solenoid valve E with the HDS Shift Solenoid Valve Test, Replacement, And Shift Solenoid Wire Harness Replacement.

Notes

Inspect the O-ring, and check for a seized shift solenoid valve.

Notes

Check for a missing shift fork bolt on the shift fork shaft.

Notes

Check shift valve E in the main valve body for free movement, and check the valve spring for wear and damage.

Notes

Check the 4th clutch pressure A/T Pressure Test.

Notes

Check the 4th/reverse accumulator piston, the O-ring, and the spring in the servo body for wear and damage.

Notes

Inspect the clutch piston, the clutch piston check valve, and the O-rings. Check the spring retainer for wear and damage. Inspect the clearance between the clutch end-plate and the top disc. If the clearance is out of tolerance, inspect the clutch discs and the plates for wear and damage. If the discs are worn or damaged, replace them as a set. Inspect the clutch wave-plate height. If the height is out of tolerance, replace the wave-plate. If the discs and the plates are OK, adjust the clearance with the clutch end-plate.

Notes

Inspect the reverse selector gear teeth chamfers, and inspect the engagement teeth chamfers of the countershaft 4th gear and the reverse gear. Replace the reverse gears and the reverse selector if they are worn or damaged. If the transmission makes a clicking, grinding, or whirring noise, also replace the mainshaft 4th gear, the reverse idler gear, and the countershaft 4th gear.