Rear Seat Belt Replacement

Rear Seat Belt Replacement

Rear Seat Belt

NOTE:

- Check the rear seat belts for damage Testing and Inspection, and replace them if necessary.
- Take care not to tear or damage the seat covers.
- Put on gloves to protect your hands.

1. Fold the rear seat up.

2. Remove the rear side trim panel Interior Trim Removal/Installation - Rear Side Area.

3. Pull back the carpet as necessary, and remove the lower anchor bolt (A).






4. Remove the upper anchor cap (A), and remove the upper anchor bolt (B).






5. Remove the retractor mounting self-tapping screw (A), and the retractor bolt (B), then remove the rear seat belt (C) and the retractor (D).






6. Install the seat belt in the reverse order of removal, and note these items:

- Assemble the washers, the collar, and the bushing on the upper anchor bolt as shown.
- Check that the retractor locking mechanism functions Testing and Inspection.
- Apply medium strength liquid thread lock to the anchor bolts before reinstallation.
- Tighten the bolts by hand first, then tighten to the specified torque.
- Before installing the anchor bolts, make sure there are no twists or kinks in the seat belt.

Upper anchor bolt installation






Rear Center Seat Belt

NOTE:

- Take care not to damage the headliner.
- Check the center seat belt for damage Testing and Inspection, and replace it if necessary.

1. Remove the cap (A) from the retractor cover (B).





2. Remove the headliner Service and Repair.

3. Remove the retractor mounting bolt (A) and the retractor anchor bolts (B), then remove the center seat belt (C) and the retractor (D).





4. If necessary, replace the retractor cover Service and Repair.

5. Install the center seat belt and the retractor in the reverse order of removal, and note these items:

- Check that the retractor locking mechanism functions Testing and Inspection.
- Apply medium strength liquid thread lock to the retractor anchor bolts before reinstallation.

Rear Center Seat Belt Detachable Anchor and Right Rear Seat Belt Buckle

NOTE:

- Take care not to tear or damage the seat covers.
- Put on gloves to protect your hands.

1. Remove the rear seat Rear Seat Removal/Installation.

2. Remove the undercover from the rear seat Right Rear Seat Cover Replacement.

3. Remove the center anchor bolts (A) from under the seat cushion.






4. Pull out the rear center seat belt detachable anchor (A) and the right rear seat belt buckle (B).






5. Install the anchor and the buckle in the reverse order of removal, and note these items:

- Assemble the washer on the center anchor bolt as shown.
- Apply medium strength liquid thread lock to the anchor bolts before reinstallation.
- Make sure there are no twists or kinks in the anchor, the center belt, or the seat belt buckle.

Center anchor bolt installation






Rear Center Seat Belt Buckle and Left Rear Seat Belt Buckle

NOTE:

- Take care not to tear or damage the seat covers.
- Put on gloves to protect your hands.

1. Fold the rear seat up (one side).

2. Remove the outer cover.

- Right rear seat Right Rear Seat Cover Replacement
- Left rear seat Left Rear Seat Cover Replacement

3. Remove the center anchor bolt (A).






4. Pull out the rear center seat belt buckle (A) (right rear seat) or left rear seat belt buckle (left rear seat).






5. Install the buckle in the reverse order of removal, and note these items:

- Assemble the collar and the washer on the center anchor bolt as shown.
- Apply medium strength liquid thread lock to the anchor bolt before reinstallation.
- Make sure there are no twists or kinks in the seat belt buckle.

Center anchor bolt installation