Transmission End Cover Idler Gear Shaft Bearing Replacement

Transmission End Cover Idler Gear Shaft Bearing Replacement

Special Tools Required

- Adjustable Bearing Puller, 25-40 mm 07736-A01000B
- Driver Handle, 15 x 135L 07749-0010000
- Attachment, 52 x 55 mm 07746-0010400

1. Remove the idler gear shaft bearing (A) from the end cover (B) using the adjustable bearing puller and a commercially available 3/8 "-16 slide hammer (C).






2. Install a new bearing in the end cover using the driver handle (15 x 135L) and the attachment (52 x 55 mm).