Manufacturer Code Charts: 87

VSA DTC Troubleshooting: 87

DTC 87:

Current Flow into Wheel Speed Sensor Input Amplifier

1. Turn the ignition switch to ON (II).

2. Clear the DTC with the HDS.

3. Turn the ignition switch to LOCK (0), then turn it to ON (II) again.

4. Check for DTCs with the HDS.

Is DTC 87 indicated?

YES -

Do the DTC 11, 13, 15, or 17 troubleshooting VSA System.�

NO -

Intermittent failure, the system is OK at this time. Check for loose terminals between the wheel speed sensor 2P connector and the VSA modulator-control unit 46P connector. Refer to intermittent failures troubleshooting Reading and Clearing Diagnostic Trouble Codes.�