Subframe: Service and Repair

Subframe Replacement

Front Subframe Torque

NOTE:

- Before removing the subframe, make a mark where the subframe lines up with the body for reinstallation.
- After loosening the subframe mounting bolts, be sure to replace them with new ones.
- When installing, align both installation reference holes in the subframe with both reference holes in the body using a screwdriver or tapered punch as a guide.
- After reinstallation all removed parts, check and adjust the front wheel alignment Service and Repair.

1. Loosely install new front subframe mounting bolts, then tighten the bolts to the specified torque in the sequence shown.






Rear Subframe Torque

NOTE:

- After loosening the subframe mounting bolts, be sure to replace them with new ones.
- When installing, align both installation reference holes in the subframe with both reference holes in the body using a screwdriver or tapered punch as a guide.