Dashboard Center Trim Removal/Installation

Dashboard Center Trim Removal/Installation

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*Available through the Honda Tool and Equipment Program; 888-424-6857

NOTE:

- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
- Take care not to scratch the dashboard or the related parts.

1. Remove these items:

- Dashboard center vent Dashboard Center Vent Removal/Installation
- HVAC control unit HVAC Control Unit Removal/Installation (Without Climate Control)
- Passenger's vent panel Passengers Vent Panel Removal/Installation
- Shift lever panel Shift Lever Panel Removal/Installation
- Instrument panel Instrument Panel Removal/Installation
- Front passenger's airbag Air Bag
- Audio-Navigation unit, with navigation system
- '07-09 models Audio-Navigation Unit Removal/Installation
- '10-11 models Audio-Navigation Unit Removal/Installation
- Audio unit, without navigation system.

2. Remove the screws.






3. Gently pull out the dashboard center trim (A) to detach the clips, then remove the trim.

4. Install the trim in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips into place securely.