Driver's Outer Dashboard Trim Removal/Installation

Driver's Outer Dashboard Trim Removal/Installation

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*Available through the Honda Tool and Equipment Program; 888-424-6857

NOTE:

- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
- Take care not to scratch the dashboard or the related parts.

1. Remove the instrument upper visor Instrument Upper Visor Removal/Installation.

2. Pull out the upper edge of the driver's outer dashboard trim (A) with the appropriate trim tool to release the hooks (B), then remove the trim.





3. Install the trim in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the hooks into place securely.