Instrument Upper Visor Removal/Installation

Instrument Upper Visor Removal/Installation

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*Available through the Honda Tool and Equipment Program; 888-424-6857

NOTE:

- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
- Take care not to scratch the dashboard or the related parts.

1. Release the tilt/telescopic lock lever, tilt the steering column all the way down, and it all the way out.

2. Gently pull out on the upper edge of the instrument upper visor (A) to detach the upper clips.






3. Pull back the instrument upper visor (A) to detach the clips, and release the hooks (B).





4. Install the visor in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips and the hooks into place securely.