Transmission Fluid Pressure Switch A (2nd Clutch) Replacement

Transmission Fluid Pressure Switch A (2nd Clutch) Replacement

1. Remove the air cleaner:

- K24Z6 engine Service and Repair

2. Disconnect the transmission fluid pressure switch A (2nd clutch) connector, and remove the switch (A).





3. Install a new transmission fluid pressure switch A (2nd clutch) and a new sealing washer (B), and tighten the switch.

4. Check the connector for rust, dirt, or oil, and clean or repair if necessary, then connect the connector securely.

5. Install the air cleaner:

- K24Z6 engine Service and Repair