Center Console Removal/Installation (Except SC Models)

Center Console Removal/Installation

Except SC Models ('07-08 Models)

NOTE: Take care not to scratch the front seat or the related parts.

1. Pull up the front edge of the center console (A) to detach the clips, and remove the console by pulling it forward to release the hooks (B).





2. Install the console in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips and the hooks into place securely.

Except SC Models ('09-11 Models)

NOTE:

- Take care not to scratch the front seat or the related parts.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. For some models: Pivot the handle (A) to the unlock position, and slide the removable cooler/console (B) rearward, then pull it up.






2. Push in where indicated to release the hook (A), and pull up on the beverage holder (B) to release the tabs (C), then remove the holder.






3. Insert the appropriate trim tool into the notch (A), and pry out along the edge of the cover (B) to release the hooks (C), then remove the cover.






4. Remove the bolts, and pull up the front edge of the center console (A) to release the clips, then remove the console.





5. Install the console in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips and the hooks into place securely.