Dashboard Drivers Pocket Removal/Installation

Dashboard Driver's Pocket Removal/Installation

NOTE:

- Put on gloves to protect your hands.
- Take care not to scratch the dashboard or the related parts.

1. Remove the driver's dashboard lower cover Driver's Dashboard Lower Cover Removal/Installation.

2. From the driver's dashboard lower cover opening, push out the lock tabs (A) to release the cruise control main switch (B) ('07-08 models) and the VSA OFF switch (C), then disconnect the connectors (D, E).

'07-08 models





'09-11 models





3. From under the dash, remove the screws (A, B), then remove the driver's pocket (C) while pulling out on the bottom edge of the dashboard (D).





4. Install the driver's pocket in the reverse order of removal, and make sure each connector is plugged in properly.