Driver's Dashboard Panel Removal/Installation

Driver's Dashboard Panel Removal/Installation

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*

NOTE:

- Take care not to scratch the dashboard or the related parts.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Remove the driver's dashboard side panel (A).

1. Open the front door.

2. Gently pry the edge of the panel to release the hooks (B).





2. Adjust the steering column to the full tilt down position.

3. Remove the driver's dashboard panel (A).

1. Remove the screw.

2. Gently pull out the panel to detach the clips and release the hooks (B).





4. Install the panel in the reverse order of removal, and push the clips and the hooks into place securely.