Interior Trim Removal/Installation - Hatch Area

Interior Trim Removal/Installation - Hatch Area

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*

NOTE:

- Put on gloves to protect your hands.
- Take care not to bend or scratch the panel.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Remove the hatch trim panel as shown.

2. Install the trim in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Make sure the rear window defogger wire harness on each side is not pinched.
- Push the clips and the hooks into place securely.