Manufacturer Code Charts: 2706

Navigation System DTC Troubleshooting: 2706

DTC 2706:

Gyro Diag: ECU Temp XX °C

NOTE:

- Check the vehicle battery condition first Testing and Inspection.
- This navigation DTC sets when the audio-navigation unit internal yaw rate sensor's temperature is out of its specified range.
- Before you troubleshoot, make sure to follow the General Troubleshooting Information Reading and Clearing Diagnostic Trouble Codes.

1. Check that the dash temperature is between -4 °F (-20 °C) and 158 °F (70 °C).

2. Clear the hard error code.

3. Turn the ignition switch to LOCK (0), and then back ON (II).

4. Check for the hard error code.

Is DTC 2706 indicated?

YES -

Replace the audio-navigation unit Audio-Navigation Unit Removal/Installation (With Navigation).�

NO -

Intermittent failure, the system is OK at this time. If the vehicle repeatedly comes back with the navigation DTC, replace the audio-navigation unit Audio-Navigation Unit Removal/Installation (With Navigation).�