45-2x

SRS DTC Troubleshooting: 45-2x, 45-3x, 45-Bx

DTC 45-2x, 45-3x, 45-Bx ("x" can be 0 thru 9 or A thru F):

Internal Failure of the Left Side Impact Sensor (second)

NOTE: Before doing this troubleshooting procedure, review SRS Precautions and Procedures Service and Repair and General Troubleshooting Information Reading and Clearing Diagnostic Trouble Codes.

1. Clear the DTC memory.

2. Turn the ignition switch to ON (II), then wait for 10 seconds.

3. Read the DTC.

Is DTC 45-2x, 45-3x, or 45-Bx indicated?

YES -

Faulty left side impact sensor (second) or SRS unit; replace the left side impact sensor (second) Side Impact Sensor (Second) Replacement, then clear the DTC, and retest. If the DTC is still present, replace the SRS unit SRS Unit Replacement.�

NO -

Intermittent failure, the system is OK at this time. Go to Troubleshooting Intermittent Failures. If another DTC is indicated, troubleshoot the DTC.�