85-71

SRS DTC Troubleshooting: 85-71, 85-78

DTC 85-71, 85-78:

ODS Unit Not Initialized

NOTE: Before doing this troubleshooting procedure, review SRS Precautions and Procedures Service and Repair and General Troubleshooting Information Reading and Clearing Diagnostic Trouble Codes.

1. Clear the DTC memory.

2. Turn the ignition switch to ON (II), then wait for 10 seconds.

3. Read the DTC.

Is DTC 85-71 or 85-78 indicated?

YES -

Go to step 4.

NO -

Intermittent failure, the system is OK at this time. Go to Troubleshooting Intermittent Failures. If another DTC is indicated, troubleshoot the DTC.�

4. Clear the DTC memory.

5. Do the ODS unit initialization Programming and Relearning.

6. Turn the ignition switch to ON (II), then wait for 10 seconds.

7. Read the DTC.

Is DTC 85-71 or 85-78 indicated?

YES -

Go to step 8.

NO -

The system is OK at this time.�

8. Replace the ODS unit ODS Unit Replacement.

9. Clear the DTC memory.

10. Turn the ignition switch to ON (II), then wait for 10 seconds.

11. Read the DTC.

Is DTC 85-71 or 85-78 indicated?

YES -

Replace the SRS unit SRS Unit Replacement.�

NO -

The system is OK.�