Water Pump Replacement

Water Pump Replacement

1. Remove the drive belt Service and Repair.

2. Drain the engine coolant Service and Repair.

3. Remove the crankshaft pulley.

4. Remove the six bolts securing the water pump (A), then remove the water pump.





5. Inspect and clean the O-ring groove and mating surface of the water passage.

6. Install the water pump with a new O-ring (B).

7. Clean up any spilled engine coolant.

8. Install the crankshaft pulley.

9. Install the drive belt Service and Repair.

10. Refill the radiator with engine coolant, and bleed air from the cooling system with the heater valve open Service and Repair.