B1060

DTC Troubleshooting: B1060

DTC B1060:

Relay Control Module Lost Communication With Gauge Control Module (VSP/NE message)

NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A Troubleshooting - B-CAN System Diagnosis Test Mode A.

1. Clear the DTCs with the HDS.

2. Turn the ignition switch to LOCK (0), and then back to ON (II).

3. Wait for at least 6 seconds.

4. Check for DTCs with the HDS.

Is DTC B1060 indicated?

YES -

Go to step 5.

NO -

Intermittent failure, the communication line is OK at this time.�

5. Check for DTCs with the HDS.

Are DTCs B1205, B1357, B1805, B2010, and B2060 also indicated?

YES -

Go to gauge control module input test Gauge Control Module Input Test.�

NO -

Go to relay control module input test Relay Control Module Input Test.�