B1152

DTC Troubleshooting: B1152

DTC B1152:

Gauge Control Module EEPROM Error

NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A Troubleshooting - B-CAN System Diagnosis Test Mode A.

1. Clear the DTCs with the HDS.

2. Start the engine.

3. Check for DTCs with the HDS.

Is DTC B1152 indicated?

YES -

Faulty gauge control module; replace the gauge control module Service and Repair.�

NO -

Intermittent failure. The gauge control module is OK at this time. Check for loose or poor connections. If the connections are good, check the battery condition Testing and Inspection, and the charging system.�