B1350

DTC Troubleshooting: B1350

DTC B1350:

Communication Bus Line Error (BUS OFF)

NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A Troubleshooting - B-CAN System Diagnosis Test Mode A.

1. Clear the DTCs with the HDS.

2. Turn the ignition switch to LOCK (0), and then back to ON (II).

3. Wait for at least 6 seconds.

4. Check for DTCs with the HDS.

Is DTC B1350 indicated?

YES -

Go to step 5.

NO -

Intermittent failure, the system is OK at this time. Check for loose or poor connections at power tailgate control unit connector C (14P), at MICU-rear junction box connector A (14P) and G (8P), and at driver's under-dash fuse/relay box connector G (6P).�

5. Check for DTCs with the HDS.

Is DTC B1000 also indicated?

YES -

Troubleshoot DTC B1000 B1000.�

NO -

If only B1350 is indicated, replace the power tailgate control unit.�