B2052

DTC Troubleshooting: B2052

DTC B2052:

Right Power Sliding Door Control Unit EEPROM Error

NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A Troubleshooting - B-CAN System Diagnosis Test Mode A.

1. Disconnect the battery negative cable and wait for 10 seconds, then reconnect it.

2. Turn the ignition switch to LOCK (0), and then back to ON (II).

3. Check for DTCs with the HDS.

Is DTC B2052 indicated?

YES -

Replace the right power sliding door control unit.�

NO -

Intermittent failure. The system is OK at this time. Check for loose or poor connections at the right power sliding door control unit.�