B2060

DTC Troubleshooting: B2060

DTC B2060:

Right Power Sliding Door Control Unit Lost Communication With Gauge Control Module (VSP/NE Message)

NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A Troubleshooting - B-CAN System Diagnosis Test Mode A.

1. Clear DTCs with the HDS.

2. Turn the ignition switch to LOCK (0), and then back to ON (II).

3. Wait for at least 6 seconds.

4. Check for DTCs with the HDS.

Are DTCs B1060, B1205, B1357, B1805, B2010, and B2060 indicated?

YES -

Go to gauge control module input test Gauge Control Module Input Test.�

NO -

Go to right power sliding door control unit input test Power Sliding Door Control Unit Input Test.�