Cabin Noise Cancellation Control Module: Service and Repair

Active Noise Cancellation Unit Removal/Installation

NOTE:

- Put on gloves to protect your hands.
- Take care not to scratch the headliner and display cover.
- Lay a workshop towel under the parts when working on them to protect the face panel from scratches or other damage.

'07 model and '08-10 models with premium audio system

1. Remove the audio unit (with navigation) Audio Unit Removal/Installation or center pocket (without navigation) Dashboard Center Pocket Removal/Installation.

2. Disconnect the connector (A), then remove the bolt (B) and the active noise cancellation unit (C).





3. Install the unit in the reverse order of removal.

'08-10 models without premium audio system

1. Remove the glove box Lower Glove Box Removal/Installation.

2. While pushing the tab (A), pull the lever (B) up and disconnect connector (C).





3. Detach the connector clip (D).

4. Loosen the mounting bolt (E), and remove the mounting nut (F), then remove the active noise cancellation unit (G).

5. Install the unit in the reverse order of removal.