Set Speed Does Not Resume When The Resume/accel Button Is Pressed; Set Speed Cancelled by Brake Pedal

Set speed does not resume when the resume/accel button is pressed (with the cruise control main switch turned on, and set speed temporarily canceled by pressing the brake pedal)

Set speed does not resume when the resume/accel button is pressed (with the cruise control main switch turned on, and set speed temporarily canceled by pressing the brake pedal)

Check for PGM-FI DTCs Initial Inspection and Diagnostic Overview.

Check the brake pedal position switch adjustment:

Except Touring models Adjustments

Touring model Adjustments

Do the cruise control combination switch test:

VAN, DX, and LX Service and Repair

Except VAN, DX, and LX ('07 model and '08-10 models without premium audio system) Service and Repair

Except VAN, DX, and LX ('08-10 models with premium audio system) Service and Repair

Do the cruise control input test Cruise Control (PCM) Input Test.
Test the resume/accel switch signal input.
Test the brake pedal position switch signal input.

Also check for

Faulty brake pedal position switch

Also check for

Open circuit, loose or disconnected terminals:
LT GRN/BLK wire

Also check for

After market brake light bulbs that can cause false inputs