Rocker Arm and Shaft Disassembly/Reassembly (J35A6)

Rocker Arm and Shaft Disassembly/Reassembly

NOTE:

- Identify parts as they are removed so they can be reinstalled in their original locations.
- Inspect the rocker shafts and the rocker arms Rocker Arm and Shaft Inspection (J35A6).
- If reused, the rocker arms must be installed in their original locations.
- When removing or installing the rocker arm assembly, do not remove the rocker shaft mounting bolts. The bolts will keep the springs and the rocker arms on the shaft.
- Bundle the intake rocker arms with rubber bands to keep them together as a set, and remove the bands after the rocker arms have been installed.
- Prior to reassembling, clean all the parts in solvent, dry them, and apply new engine oil to the all contact points and bearing surfaces.
- When replacing the intake rocker arm assembly, remove the fastening hardware from the new intake rocker arm assembly.