Cargo Area Light Test/Replacement

Cargo Area Light Test/Replacement

1. Turn the light switch OFF.

2. Carefully pry off the lens (A) with a small screwdriver.









3. Remove the two mounting screws.

4. Disconnect the 3P connector (B) from the housing (C).

5. Check for continuity between the terminals.

- There should be continuity between terminals No. 1 and No. 2 with the switch in the MIDDLE position.
- There should be continuity between terminals No. 2 and No. 3 (Body ground) with the switch in the ON position.

6. Install in the reverse order of removal.