4th Clutch Transmission Fluid Pressure Switch Replacement

4th Clutch Transmission Fluid Pressure Switch Replacement

1. Remove the engine cover and the air cleaner assembly.

2. Remove the bolt securing the harness cover (A).





3. Remove the harness cover/clamp bracket (B), disconnect the 4th clutch transmission fluid pressure switch connector (C), then remove the harness cover from the bracket.

4. Remove the bolts securing the harness cover (A) and the harness cover/clamp bracket (B).






5. Remove the 4th clutch transmission fluid pressure switch (A) and the sealing washer (B).





6. Install a new 4th clutch transmission fluid pressure switch and a new sealing washer (B), and tighten the switch.

7. Secure the harness cover and the harness cover/clamp bracket with the bolts, and install the harness clamp on the bracket.

8. Install the harness cover on the cover bracket, and secure it with the bolt.

9. Check the connector for rust, dirt, or oil, and clean or repair if necessary, then connect the connector securely.

10. Install the air cleaner assembly and the engine cover.