Engine Controls - MIL ON/DTC P0128 Is Set

11-003

July 26, 2011

Applies To:
2008-10 Odyssey - ALL

2008-10 Odyssey: MIL Comes On with DTC P0128
(Supersedes 11-003, dated February 9, 2011, to update the information marked by asterisks)

REVISION SUMMARY

*Under WARRANTY CLAIM INFORMATION, the flat rate time was changed because the MVCI updates control modules more efficiently.*

SYMPTOM

The MIL comes on with DTC P0128 (cooling system malfunction).

PROBABLE CAUSE

The PGM-FI software misinterprets sensor inputs as a cooling system malfunction, causing DTC P0128 to be set.

CORRECTIVE ACTION

Update the PGM-FI software with the HDS.

WARRANTY CLAIM INFORMATION

The normal warranty applies.

Operation Number: 1810B1

*Flat Rate Time: 0.2 hour*

Failed Part: P/N 37820-RGL-A95

Defect Code: 03214

Symptom Code: 03203

Skill Level: Repair Technician

SOFTWARE INFORMATION HDS Software Version:
2.024.011 or later

Control Module (CM) Update:
Database Update 28-DEC-2010 or later

NOTE:
To avoid an incorrect repair that would not be covered under warranty, use the software version listed above or a later version.





The updated PGM-FI software program ID and P/N is shown. If the HDS or MVCI is loaded with the latest software, and it displays No Update Needed during the update, the software for this service bulletin is already installed.

REPAIR PROCEDURE

Update the PGM-FI software with the HDS. Refer to Service Bulletin 01-023, Updating Control Units/Modules.





Disclaimer