Sunroof / Moonroof Switch: Testing and Inspection

Moonroof Switch Test/Replacement

NOTE: The moonroof can still be operated for about 10 minutes after the ignition switch is turned from the ON (II) to the ACCESSORY (I) or LOCK (0) positions, as long as none of the doors are opened. This provides a convenience to parked occupants while offering a degree of security against unwanted or accidental moonroof operation.

1. Remove the driver's dashboard outer panel Driver's Dashboard Outer Panel Removal/Installation.

2. Carefully push out the moonroof switch (A) from behind the driver's dashboard outer panel, then disconnect the 6P connector (B) from the switch.






3. Check for continuity between the terminals in each switch position according to the table.





4. If the continuity is not as specified, replace the illumination bulb (C) or the switch.