Second Row Seat Armrest Beverage Holder Replacement

Second Row Seat Armrest Beverage Holder Replacement

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*Available through the Honda Tool and Equipment Program, 888-424-6857

NOTE:

- Take care not to tear or damage the seat covers.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Pry up the beverage holder (A) with an appropriate trim tool to release the clips, then remove it.






2. Install the beverage holder in the reverse order of removal, and if the clips are damaged or stress-whitened, replace them with new ones.