Third Row Seat Removal/Installation

Third Row Seat Removal/Installation

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*Available through the Honda Tool and Equipment Program, 888-424-6857

NOTE:

- Put on gloves to protect your hands.
- Take care not to scratch the body or tear the seat covers.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
- The left third row seat is shown; the right third row seat is similar.

1. Detach the third row seat-belt from the detachable anchor.

2. Remove the front mounting bolt covers (A) from both front anchor brackets.






3. Remove the front mounting bolts.






4. On the left third row seat: Release the hooks (A), then remove the seat belt buckle pocket (B), and tuck the left third row seat belt buckle (C) and the center third row seat belt detachable anchor (D) under the seat cushion.






5. Lift the seat cushion up.

6. Remove the rear mounting bolts while holding the seat cushion.






7. With the help of an assistant, remove the third row seat through the tailgate opening.

8. Install the seat in the reverse order of removal.