Parking Brake Pedal: Service and Repair

Parking Brake Pedal Replacement

1. Remove the driver's dashboard lower cover Driver's Dashboard Lower Cover Removal/Installation.

2. Remove the driver's side kick panel Service and Repair.

3. Release the parking brake pedal fully.

4. Disconnect the parking brake switch connector (A) from the parking brake switch, and remove the harness clips.





5. Remove the parking brake release lever mounting bolt (B).

6. Remove the parking brake pedal bracket mounting bolt (C) and nuts (D).

7. Remove the parking brake adjusting nut (E) and the cable clip (F).

8. Disconnect the parking brake cable from the parking brake pedal (G), and remove the parking brake pedal assembly.

9. Remove the parking brake switch and release lever assembly.

10. Install the parking brake pedal assembly in the reverse order of removal, and note there items:

- Be careful not to bend or distort the cable.
- Adjust the parking brake Adjustments.