Tightening Torque and Sequence

Cylinder Head Bolt

Measure the diameter of each cylinder head bolt at point A and point B.





If either diameter is less than 10.6 mm (0.42 in), replace the cylinder head bolt.

Front





Rear






Torque the cylinder head bolts in sequence to 29 Nm (3.0 kg-m, 22 lb-ft)

After torquing, tighten all cylinder head bolts in two steps (90 ° per step)

If you are using a new cylinder head bolt
Tighten the bolt an extra 90 °

Camshaft Bearing cap

Front










Rear










Intake Manifold Specifications

Camshaft Gear/Sprocket Specifications