Manufacturer Code Charts: 2702

Navigation System DTC Troubleshooting: 2702

DTC 2702:

GPS Diag: Receiver in Navi ECU

NOTE:

- Check the vehicle battery condition first Testing and Inspection.
- Check any official Honda service website for more service information about the navigation system.
- This navigation DTC sets when a problem is detected in the GPS antenna.
- Before you troubleshoot, make sure to follow the general troubleshooting information How To Troubleshoot The Navigation System.
- Make sure the vehicle is parked outside, away from buildings.
- Check for electronic aftermarket accessories (possibly hidden) mounted near the GPS antenna or the navigation unit.

1. Clear the hard error code.

2. Turn the ignition switch to LOCK (0), and then back to ON (II).

3. Go into the Diagnostic Menu, and select the Self-Diagnosis Mode in the Select Diagnosis Items menu Navigation System Diagnostic Mode.

4. Select the System Links, then select the GPS Ant.

Is Receiver in Navi ECU OK indicated?

YES -

Intermittent failure, the system is OK at this time.�

NO -

Replace the navigation unit Service and Repair.�