Manufacturer Code Charts: 2706

Navigation System DTC Troubleshooting: 2706

DTC 2706:

Gyro Diag: ECU Temp XX °C

NOTE:

- Check any official Honda service website for more service information about the navigation system.
- This navigation DTC sets when the navigation unit YAW sensor's temperature is out of its specified range.
- Before you troubleshoot, make sure to follow the general troubleshooting information How To Troubleshoot The Navigation System.
- Do this test only when the vehicle cabin temperature is between -4 °F (-20 °C) and 158 °F (70 °C).

1. Clear the hard error code.

2. Turn the ignition switch to LOCK (0), and then back ON (II).

3. Check for the hard error code.

Is DTC 2706 indicated?

YES -

Go to step 4.

NO -

Intermittent failure, the system is OK at this time.�

4. Check the cooling fan opening on the back of the navigation unit.

Is the cooling fan opening blocked or covered?

YES -

Clean or clear the fan opening, then retest.�

NO -

Replace the navigation unit Service and Repair.�