Advanced Diagnostics

DTC P0351 (71), P0352 (72), P0353 (73), P0354 (74), P0355 (75), P0356 (76) Advanced Diagnostics

DTC P0351:

No. 1 Cylinder Ignition Coil Circuit Malfunction

DTC P0352:

No. 2 Cylinder Ignition Coil Circuit Malfunction

DTC P0353:

No. 3 Cylinder Ignition Coil Circuit Malfunction

DTC P0354:

No. 4 Cylinder Ignition Coil Circuit Malfunction

DTC P0355:

No. 5 Cylinder Ignition Coil Circuit Malfunction

DTC P0356:

No. 6 Cylinder Ignition Coil Circuit Malfunction





General Description

The ignition coil is triggered at the optimum time by the powertrain control module (PCM). The PCM detects a malfunction when the engine is running and the return signal does not change for a specified time, the PCM detects a malfunction and stores a DTC.

Monitor Execution, Sequence, Duration, DTC Type, OBD Status





Enable Conditions





Malfunction Threshold

The return signal does not change for at least 5 seconds when the ignition coil is triggered.

Diagnosis Details

Conditions for setting the DTC

When a malfunction is detected, the MIL comes on and a Pending DTC, a Confirmed DTC, and the freeze data are stored in the PCM memory.

Conditions for clearing the DTC

The MIL is cleared if the malfunction does not return in three consecutive trips in which the diagnostic runs. The MIL, the Pending DTC, the Confirmed DTC, and the freeze data can be cleared with using the scan tool Clear command or by disconnecting the battery.