Cowl Moulding / Trim: Service and Repair

Cowl Cover Replacement

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*Available through the Honda Tool and Equipment Program, 888-424-6857

NOTE:

- Take care not to scratch the cowl cover and body.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Remove the windshield wiper arms Windshield Wiper Motor Replacement.

2. Remove the clips (A) with a trim tool from the cowl cover (B).





3. If necessary, remove the hood rear seal (C) from all of the hooks (D).

4. If necessary, release the hooks (A) and pins (B), then remove the hood hinge cover extension (C) from both sides of the cowl cover (D).






5. Pull the cowl cover (A) forward to release the hooks (B, C) from the windshield (D) and body.





6. Remove the cowl cover.

7. Install the cover in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips and hooks into place securely.