Air Bag Deactivation Indicator: Service and Repair

Passenger's Airbag Cutoff Indicator Illumination Bulb Test/Replacement

1. Remove these items;

- With navigation display unit Service and Repair
- With audio-HVAC display unit Audio-HVAC Display Unit Removal/Installation

2. Remove the screws (A) and the passenger's airbag cutoff indicator (B) from display unit.





3. Check for continuity between the No. 2 and No. 3 terminals of the indicator. If there is no continuity, replace the bulb (C).

4. Reinstall the parts in the reverse order of removal.

5. After installing the passenger's airbag cutoff indicator, confirm proper system operation:

- Clear any DTCs with the HDS.
- Turn the ignition switch to ON (II), and check that the SRS indicator comes on for about 6 seconds and then goes off.