AC Inverter Unit Input Test/Replacement (With AC Power Outlet)

AC Inverter Unit Input Test/Replacement

1. Do the battery terminal disconnection procedure.

2. Remove the passenger's side center console trim Center Console Removal/Installation.

3. Disconnect the 12P connector (A) from the AC inverter unit (B).





4. Inspect the connector and socket terminals to be sure they are all making good contact.

- If the terminals are bent, loose, or corroded, repair them as necessary, and recheck the system.
- If the terminals look OK, go to step 5.

5. With the connector still disconnected, do the following input tests.

- If any test indicates a problem, find and correct the cause, then recheck the system.
- If all the input tests prove OK, go to step 6.





6. Reconnect the connector, turn the ignition switch to ON (II), and do the following input tests.

- If any test indicates a problem, find and correct the cause, then recheck the system.
- If all the input tests prove OK, replace the AC inverter unit, then go to step 7.





7. Do the battery terminal reconnection procedure.