Vehicle Moves In D, 2, And R, But Not In 1

Vehicle moves in D, 2, and R, but not in 1

1st-hold clutch defective

Notes

Check the 1st-hold clutch pressure A/T Pressure Test.

Notes

Inspect the 1st-hold clutch for wear and damage.

Notes

Inspect the clutch piston, the clutch piston check valve, and the O-rings. Check the spring retainer for wear and damage. Inspect the clearance between clutch plate B and the top disc. If the clearance is out of tolerance, inspect the clutch discs and plates for wear and damage, and inspect the clutch wave-plate height. If the discs and plates are worn or damaged, replace them as a set. If the wave-plate height is out of the tolerance, replace the wave-plate.