Manufacturer Code Charts: 25

VSA DTC Troubleshooting: 25

DTC 25:

Yaw Rate Sensor (Sensor Unit)

1. Turn the ignition switch to ON (II).

2. Check for DTCs with the HDS.

Is DTC 86 indicated with DTC 25 at the same time?

YES -

Do the troubleshooting for DTC 86 86, and recheck.�

NO -

Go to step 3.

3. Turn the ignition switch to LOCK (0).

4. Substitute a known-good yaw rate-lateral acceleration sensor Service and Repair.

5. Turn the ignition switch to ON (II).

6. Clear the DTCs with the HDS.

7. Turn the ignition switch to LOCK (0) and then back to ON (II).

8. Check for DTCs with the HDS.

Is DTC 25 indicated?

YES -

Replace the VSA modulator-control unit Service and Repair.�

NO -

Replace the original yaw rate-lateral acceleration sensor Service and Repair.�