Sunroof / Moonroof Limit Switch: Testing and Inspection

Moonroof Limit Switch Test

SRS components are located in this area. Review the SRS component locations Locations, and precautions and procedures Service and Repair before doing repairs or servicing.

1. Remove the headliner Service and Repair.

2. Disconnect the 4P connector (A) from the moonroof limit switch (B).






3. Check for continuity between the terminals in each switch position according to the table.





4. If the continuity is not as specified, adjust the moonroof limit switch Adjustments, then repeat step 3.

If the continuity is still not as specified after the adjustment, replace the moonroof limit switch Service and Repair.