Sunroof / Moonroof Switch: Testing and Inspection

Moonroof Switch Test

NOTE: The moonroof can still be operated for about 10 minutes after the ignition switch is turned from the "II" to the "I" or "0" positions, as long as none of the doors are opened. This provides a convenience to parked occupants while offering a degree of security against unwanted or accidental moonroof operation.

1. Remove the instrument panel Instrument Panel Removal/Installation.

2. Carefully push out the moonroof switch (A) from behind the dashboard lower cover.






3. Check for continuity between the terminals in each switch position according to the table.





4. If the continuity is not as specified, replace the bulb (B) or the switch.

5. Install the switch in the reverse order of removal.