Vehicle Moves In D, 1, And R, But Not In 2

Vehicle moves in D, 1, and R, but not in 2

2nd accumulator defective

2nd clutch defective

Notes

Check the 2nd clutch pressure A/T Pressure Test.

Notes

Inspect the 2nd clutch for wear and damage.

Notes

Inspect the clutch piston, the clutch piston check valve, and the O-rings. Check the spring retainer for wear, damage, and peeling. Inspect the clearance between the clutch end-plate and the top disc. If the clearance is out of tolerance, inspect the clutch discs and the plates for wear and damage, and inspect the clutch wave-plate height. If the discs and the plates are worn or damaged, replace them as a set. If the wave-plate height is out of the tolerance, replace the wave-plate. If they are OK, adjust the clearance with the clutch end-plate.

Notes

Check the 2nd accumulator piston, O-ring, and spring in the accumulator body for wear and damage.