Remote Switch: Service and Repair

Audio Remote Switch Test/Replacement

SRS components are located in this area. Review the SRS component locations Locations, and the precautions and procedures Service and Repair in the SRS section before doing repairs or service.

1. Remove the driver's airbag assembly Driver's Airbag Replacement.

2. Remove the steering wheel Steering Wheel Removal.

3. Remove the audio remote switch Overhaul.





4. Measure the resistance between terminals No. 4 and No. 12 in each switch position according to the table.





5. If the resistance is not as specified, replace the audio remote switch.

6. Use a diode tester between the terminals in each switch position according to the table.





7. If the diode test is bad, replace the switch.

8. Install the audio remote switch in the reverse order of removal.