Transmission Fluid Pressure Switch B (3RD Clutch) Replacement

Transmission Fluid Pressure Switch B (3rd Clutch) Replacement

1. Remove the front splash shield Front Splash Shield Replacement.

2. Disconnect the transmission fluid pressure switch B (3rd clutch) connector, and remove transmission fluid pressure switch B (3rd clutch) (A).





3. Install a new transmission fluid pressure switch B (3rd clutch) and a new sealing washer (B), and tighten the switch.

4. Check the connector for rust, dirt, or oil, and clean or repair if necessary, then connect the connector securely.

5. Install the front splash shield Front Splash Shield Replacement.