A/T Differential Carrier, Final Driven Gear, and Transfer Drive Gear Replacement

A/T Differential Carrier, Final Driven Gear, and Transfer Drive Gear Replacement

NOTE: Inspect and adjust the carrier bearing preload whenever the differential carrier is replaced.

1. Remove the final driven gear (A) and the transfer driven gear (B) from the differential carrier (C).

NOTE: The final driven gear bolts (D) have left-hand threads.





2. Install the final driven gear on the differential carrier in the direction shown.

3. Install the bolts through the differential carrier to the transfer driven gear.

4. Tighten the bolts to the specified torque in a crisscross pattern at least two or more steps.