Vehicle Moves In 2 And R, But Not In D Or 1

Vehicle moves in 2 and R, but not in D or 1

1st gear one-way clutch defective

1st gears worn or damaged

1st clutch defective

Notes

Check the 1st clutch pressure A/T Pressure Test.

Notes

Inspect the mainshaft, the countershaft, 1st gears, and the one-way clutch for wear and damage.

Notes

Inspect the 1st clutch for wear and damage.

Notes

Inspect the clutch piston, the clutch piston check valve, and the O-rings. Check the spring retainer for wear, damage, and peeling. Inspect the clearance between the clutch end-plate and the top disc. If the clearance is out of tolerance, inspect the clutch discs and the plates for wear and damage, and inspect the clutch wave-plate height. If the discs and the plates are worn or damaged, replace them as a set. If the wave-plate height is out of the tolerance, replace the wave-plate. If they are OK, adjust the clearance with the clutch end-plate.