Part 1 of 3 - Preliminary Inspection

DTC 1-2: ABS Pump Motor Circuit Problem (Part 1 Of 3):

CAUTION: Use only the digital multimeter to check the system.

NOTE: If a malfunction is detected, this code appears and the fail-safe function is activated. The ABS indicator light comes ON after restarting the engine until the DTC is erased (by disconnecting the ABS B2 (15 Al fuse in the under-hood fuse/relay box for three seconds).

Pre-test steps:
- Check ABS MOTOR (50 A) fuse in the under-hood fuse/relay box.
- Check ABS UNIT (7.5 A) fuse in the under-hood fuse/relay box.
- Check for loose under-hood fuse/relay box connectors.