Overhaul

1. Pull out the A/C thermostat sensor from the evaporator fins.
2. Remove the self-tapping screws and clamps from the housings.
3. Carefully separate the housings, then remove the evaporator.
4. If necessary, remove the expansion valve.

NOTE: When loosening the expansion valve nuts, use a second wrench to hold the expansion valve or evaporator pipe. Otherwise, they can be damaged.

5. Assemble in the reverse order of disassembly. Make note of following items.
- Replace the 0-rings with new ones at each fitting, and apply a thin coat of refrigerant oil (Nippondenso: ND-OIL 8, P/N 38899 - PR7 - A01) before installing them.

NOTE: Be sure to use the right 0-rings for HFC-134a (R-134a) to avoid leakage.

- Install the expansion valve capillary tube with the capillary tube in contact with the suction line directly, and wrap it with tape.
- Reinstall the A/C thermostat sensor to its original location.